Call Toll-Free in US
(866) 418-1840
(Mon-Fri) 8:30 am - 5 pm PST
(Sat) 9 am - Noon PST

(01512-320E) E10 Circulation Pump w/ Flow Switch

01512-320e-circulation-pump-e10-240-volt

Easy Spa Parts

  • 01512-320e-circulation-pump-e10-240-volt
  • 01512-320e-circulation-pump-e10-240-volt
  • 01512-320e-circulation-pump-e10-240-volt
MSRP Retail: $229.00
Our Everyday Price: $179.00 

Dimension One Circulation Pump 01512-320E

The 01512-320E replacement circulation pump from Dimension One Spas was introduced in about 2006. There were several reasons for this design upgrade. Here are just a few:

  1. Greater energy efficiency at a lower operating cost. This improved hot tub pump draws just 60 watts vs the 98 watts required by the earlier version. The E-10 also runs cooler than its predecessor.
  2. A stronger, more durable motor. 230 volts versus the original 115v model comes without the need to rewire your whole spa. Installation is simple, requiring the movement of a single white wire on your existing circuit board to accommodate the higher voltage. Give us a call and we can walk you through it in just 90 seconds.
  3. Fewer error messages. The E-10’s new “open impeller” design allows more water and debris to pass through the pump, creating a stronger stream of air bubbles and resulting in fewer “FLO Error” messages from partially clogged lines.
  4. Reduced motor overheating. Some versions of the E-10 include an integrated flow switch to allow self-priming of the pump. This reduces the chances of the motor overheating after draining and refilling your spa.
  5. Easy installation. Replacement is simple as the new E-10 is the same size and shape as the earlier version. Additionally, Easy Spa Parts includes a new cord with every E-10, avoiding the complicated and timely process of switching the old cord onto a new pump (as many other companies require). Moving a cord from one pump to another is especially difficult given the small workspace and the complications of reassembling the cord strain relief.
  6. Complete installation instructions. Easy Spa Parts provides the complete installation instructions for the E-10 allowing most spa owners to install it themselves and avoid the cost of a service call.

For more information or to order, call us toll free at 866.418.1814.

Special Ground Rates!
You pay what we pay.. See details

Find Your Spa Parts


Testimonials

“I feel like you are my personal hot tub repairman. You have probably saved me hundreds of $$$. Sending two parts to try and “just send the one back that doesn’t fix the problem”, and “call me when you get the part, I’ll tell you what to do” is unheard of in today’s world!!! ”
- Carole M.

“Your service has been heaven sent, especially when I had trouble and you stood by me and held my hand. Since I"m in the Northeast, our winters are snowy and cold, but Easy Spa Parts has kept me in hot water! I can"t recommend you folks strongly enough. ”
- Steve H.