Call Toll-Free in US
(866) 418-1840
(Mon-Fri) 8:30 am - 5 pm PST
(Sat) 9 am - Noon PST

(01512-321) E10 Circulation Pump


Easy Spa Parts

  • 1512-321-thumb
  • 01512-321-laing-circulation-pump-volt-e10-240-volt
  • 01512-321-laing-circulation-pump-volt-e10-240-volt
MSRP Retail: $229.00
Our Everyday Price: $169.00 

01512-321 Hot Tub Circulation Pump

The 01512-321 replacement circulation pump from Dimension One Spas was introduced in about 2006. This pump was originally used for both the spa fountain and heater operations. Over time, the 01512-320E replacement circulation pump, with an integrated flow switch, became standard for the heater and this pump was used for the water fall or on Amore Bay spas. It can be a little confusing at times, so please call us to be sure you purchase the correct pump for your spa and application.

There were several reasons for this design upgrade.

  1. Greater energy efficiency at a lower operating cost. This improved hot tub pump draws just 60 watts vs the 98 watts required by the earlier version. The E-10 also runs cooler than its predecessor.
  2. A stronger, more durable motor. 230 volts versus the original 115v model comes without the need to rewire your whole spa. Installation is simple, requiring the movement of a single white wire on your existing circuit board to accommodate the higher voltage. Give us a call and we can walk you through it in just 90 seconds.
  3. Fewer error messages. The E-10’s new “open impeller” design allows more water and debris to pass through the pump, creating a stronger stream of air bubbles and resulting in fewer “FLO Error” messages from partially clogged lines.
  4. Easy installation. Replacement is simple as the new E-10 is the same size and shape as the earlier version. Additionally, Easy Spa Parts includes a new cord with every E-10, avoiding the complicated and timely process of switching the old cord onto a new pump (as many other companies require). Moving a cord from one pump to another is especially difficult given the small workspace and the complications of reassembling the cord strain relief.
  5. Complete installation instructions. Easy Spa Parts provides the complete installation instructions for the E-10 allowing most spa owners to install it themselves and avoid the cost of a service call.

If you have any questions, please call our experienced service techs for help.

Special Ground Rates!
You pay what we pay.. See details

Find Your Spa Parts


“Spa is working great, just wanted to thank you for all your help. It"s nice to know there are still people willing to help, and not just want your money. ”
- Roy M.

“Your speedy response was very much appreciated and the service was unreal & amazingly outstanding!!!!! Fast, Thorough and Genuine!!!!! Just wonderful. Why can’t more businesses be like you? ”
- James H.