Posts Tagged ‘Dimension One Spa Parts’

Dimension One Spa Parts – Easy Spa Parts – Flow

Monday, April 14th, 2014

Beginning in 1997, most spas started using a circulation pump to move water through the heater and the ozonating systems. Over time, small amounts of debris can begin to clog the lines. Using a small compressor to blow out these lines can improve water flow, reliability, and the possibility of an annoying “flow error”.

We recommend this simple procedure be done every few of years. It costs you nothing and increases the reliability of your spa’s operation. Remember to keep the compressor setting at about 40 pounds. Higher pressures may cause problems to the internal plumbing. Click here to read more about Flow.

As always, we appreciate your business, and look forward to hearing from you about this, or any other questions you might have.

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Spa Filter Care

Monday, April 7th, 2014

Your filter is critical to clear, clean water and efficient spa performance. Luckily, taking care of your filter is easy and has a great payoff. At a recent industry trade show I learned of an inexpensive filter soak; 5 gallons of water and 1 cup of TSP, (available at any hardware or paint store). Soak for 2 hours and rinse thoroughly. It will break down the oils and lotions we bring into the spa, at a fraction of the cost of regular filter cleaners. Be sure to wear rubber gloves when working with this solution.

Click Here to Get Your Free Spa Filter Care Guide

Feel free to call us anytime.

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Water Care

Monday, March 31st, 2014

Effective water care can be like chasing the end of the rainbow; you see it but have a hard time reaching it. 10 Things You Should Know About Water Care is a list of some common, (yet little known), facts to get you to that illusive pot of gold. Click Here to view our Water Care Guide.

We appreciate your business and remember, you can call us anytime you have a question about your spa, or water care.

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Ozone System

Monday, March 24th, 2014

In 1989 Dimension One Spas was the first manufacturer in the industry to introduce an ozone system in their spas. Since then, every spa company has followed and well over half of all new hot tubs include one. Starting with Crystal Pure, followed by UltraPure in 1997, and UltraPure Plus in 2007 Dimension One Spas has continued its leadership role. Not many people realize their ozone generators should be replaced every 2 years to continue providing clear, clean water. And for spa owners who have forgotten the benefits of ozone, (or newer owners who never heard), this tip explains it for you. Click here to learn more about the ozone system.

Call us if you have any questions about getting your spa clean and ready for your “hot tub” nights.

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Spa Purge

Monday, March 17th, 2014

Spa Purge is our favorite product and we love to recommend it. While you can drain your spa water and clean the shell, cleaning out the plumbing was impossible until now. Spa Purge is a natural enzyme solution that removes the biofilm and “floaties” that sometimes appear in your water. You’ll immediately see the improvement after using Spa Purge. Use it every 1-2 years, and always if you are taking over a spa from a previous owner. Got a question? Call us toll-free (866) 418-1840. Click here for Spa Purge Instructions or watch our Spa Purge Video here.

Remember, you can call us anytime you have a question about your spa or water care.
As always, we appreciate your business.

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Circuit Board

Monday, March 10th, 2014

Dimension One Spa Parts – Easy Spa Parts – Circuit BoardIt’s time to consider a preventative maintenance tip the next time you drain and re-fill your spa. The burnt spot on this circuit board is not very common, but it occasionally happens; and here is the most common reason. Loose connections on the circuit can cause “electrical chatter”. The electricity flow is not consistent and the connection gets hot; causing the burnt spot on the board. To quote Benjamin Franklin: An ounce of prevention is worth a pound of cure.

To help prevent a burnt spot and save the cost of a new pc board:

1. Turn off power to the spa at the gfci, (ground fault circuit interrupter / breaker box).

2. Secure all the connections at the circuit board. Ring and fork connections should be snug, (but don’t over tighten). Male and female connections should be completely on. The terminals on the board should be clean so roughing them up a bit with sandpaper is always a good idea.

3. Turn the power back on and confirm all the normal functions are operative on the upper control panel, (light, jets, etc.).

It’s Easy as that. Please call if you have any questions. (866) 418-1840 toll free.

Phil Sandner
President
EasySpaParts.com
[email protected]

Dimension One Spa Parts – Easy Spa Parts – Cover Shield

Monday, March 3rd, 2014

Dimension One Spa Parts – Easy Spa Parts – Cover Shield Dimension One Spa Parts – Easy Spa Parts – Cover Shield

Finally, a perfect solution for extending the life of a new or existing cover!

The Sun, Rain, Leaves, Dirt, Debris, Wind and Snow… all have damaging effects on expensive vinyl spa covers. Manufactured from high quality “Solution Dyed Polyester”, the tried and proven protective material used in the boating industry, Cover Shields are custom designed with a 12 inch skirt and adjustable tension band for a perfect fit. Available in gray, silver or tan, upgrade your backyard today. Saves time and $$$$!

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840