Archive for the ‘Dimension One Spa Parts’ Category

Dimension One Spa Parts – Easy Spa Parts – Hot Tub Spring Tune Up Time

Monday, May 5th, 2014

Dimension One Spa Parts – Easy Spa Parts – Hot Tub Spring Tune Up TimeNow that we are looking at Old Man Winter in our rear view mirror, it’s time to inspect our hot tub as we prepare for Spring.

Click Here to get your free Spring Tune Up Checklist. This list indicates items that need a quick review so you can begin using your spa again with confidence.

For those who never stopped using their hot tub this Winter, this review ensures your spa is still in tip-top condition.

Please call if you have any questions…

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Hot Tub Stormy Weather Tips

Monday, April 28th, 2014

Autumn marks the beginning of unsettled and stormy weather across the nation. Lightning storms can cause sudden surges of power through your electrical system that overpower the gfi and damage the spa’s circuit board and can mean replacing a circuit board worth several hundred dollars. If it’s safe, turn off power to your spa before lightning strikes begin; this can save the spa’s circuitry, and preserve your pocketbook. Once the storm passes, power for your hot tub can be turned back on. Never turn power on and off while you are standing in the rain.

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Water Care Guide

Monday, April 21st, 2014

Dimension One Spa Parts – Easy Spa Parts – Water Care GuideWhen you open your spa cover nothing is more inviting than clean, clear water. We have always written our own Water Care Guide to make getting there as “easy” as possible. Please Click Here to receive the latest revision of our Water Care Guide. If you’d like a printed booklet, just call and ask; we’ll mail it for free.

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Hinge Protector

Monday, April 21st, 2014

Hinge-ProtectorToday, I want to talk to you about your spa cover, more specifically your hinge protector. Your what, you say?

We are proud to introduce a new feature found only on Easy Spa Parts covers; the Hinge Protector.

As you know, because the hinge is used every time your cover is opened, it tends to be one of the first things to wear out. All spa covers from Easy Spa Parts already include a full length heat seal to prevent heat loss through the hinge.

Over time, an EZ Lifter bar, or just plain wear and tear, can cause the top of the hinge to tear and allow rain water in from the top. We’ve designed a 9″ Hinge Protector to help extend the life of your cover. This strip of vinyl is sewn over the length of the hinge to help protect the fold from ice and snow too.

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Flow

Monday, April 14th, 2014

Beginning in 1997, most spas started using a circulation pump to move water through the heater and the ozonating systems. Over time, small amounts of debris can begin to clog the lines. Using a small compressor to blow out these lines can improve water flow, reliability, and the possibility of an annoying “flow error”.

We recommend this simple procedure be done every few of years. It costs you nothing and increases the reliability of your spa’s operation. Remember to keep the compressor setting at about 40 pounds. Higher pressures may cause problems to the internal plumbing. Click here to read more about Flow.

As always, we appreciate your business, and look forward to hearing from you about this, or any other questions you might have.

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Spa Filter Care

Monday, April 7th, 2014

Your filter is critical to clear, clean water and efficient spa performance. Luckily, taking care of your filter is easy and has a great payoff. At a recent industry trade show I learned of an inexpensive filter soak; 5 gallons of water and 1 cup of TSP, (available at any hardware or paint store). Soak for 2 hours and rinse thoroughly. It will break down the oils and lotions we bring into the spa, at a fraction of the cost of regular filter cleaners. Be sure to wear rubber gloves when working with this solution.

Click Here to Get Your Free Spa Filter Care Guide

Feel free to call us anytime.

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Water Care

Monday, March 31st, 2014

Effective water care can be like chasing the end of the rainbow; you see it but have a hard time reaching it. 10 Things You Should Know About Water Care is a list of some common, (yet little known), facts to get you to that illusive pot of gold. Click Here to view our Water Care Guide.

We appreciate your business and remember, you can call us anytime you have a question about your spa, or water care.

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Ozone System

Monday, March 24th, 2014

In 1989 Dimension One Spas was the first manufacturer in the industry to introduce an ozone system in their spas. Since then, every spa company has followed and well over half of all new hot tubs include one. Starting with Crystal Pure, followed by UltraPure in 1997, and UltraPure Plus in 2007 Dimension One Spas has continued its leadership role. Not many people realize their ozone generators should be replaced every 2 years to continue providing clear, clean water. And for spa owners who have forgotten the benefits of ozone, (or newer owners who never heard), this tip explains it for you. Click here to learn more about the ozone system.

Call us if you have any questions about getting your spa clean and ready for your “hot tub” nights.

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Spa Purge

Monday, March 17th, 2014

Spa Purge is our favorite product and we love to recommend it. While you can drain your spa water and clean the shell, cleaning out the plumbing was impossible until now. Spa Purge is a natural enzyme solution that removes the biofilm and “floaties” that sometimes appear in your water. You’ll immediately see the improvement after using Spa Purge. Use it every 1-2 years, and always if you are taking over a spa from a previous owner. Got a question? Call us toll-free (866) 418-1840. Click here for Spa Purge Instructions or watch our Spa Purge Video here.

Remember, you can call us anytime you have a question about your spa or water care.
As always, we appreciate your business.

Phil Sandner
President
EasySpaParts.com
[email protected]
866-418-1840

Dimension One Spa Parts – Easy Spa Parts – Circuit Board

Monday, March 10th, 2014

Dimension One Spa Parts – Easy Spa Parts – Circuit BoardIt’s time to consider a preventative maintenance tip the next time you drain and re-fill your spa. The burnt spot on this circuit board is not very common, but it occasionally happens; and here is the most common reason. Loose connections on the circuit can cause “electrical chatter”. The electricity flow is not consistent and the connection gets hot; causing the burnt spot on the board. To quote Benjamin Franklin: An ounce of prevention is worth a pound of cure.

To help prevent a burnt spot and save the cost of a new pc board:

1. Turn off power to the spa at the gfci, (ground fault circuit interrupter / breaker box).

2. Secure all the connections at the circuit board. Ring and fork connections should be snug, (but don’t over tighten). Male and female connections should be completely on. The terminals on the board should be clean so roughing them up a bit with sandpaper is always a good idea.

3. Turn the power back on and confirm all the normal functions are operative on the upper control panel, (light, jets, etc.).

It’s Easy as that. Please call if you have any questions. (866) 418-1840 toll free.

Phil Sandner
President
EasySpaParts.com
[email protected]