Preparing to Use the 2-Part Epoxy Kit without a Mixing Nozzle
Requires:
- Epoxy
- Barrel
- Plunger
- Caulking gun (not pictured)
Plastic Welder 2-Part Epoxy begins to set up in 1-3 minutes.
Be sure your project is ready before opening the epoxy tube.
Step 1:
Twist and remove epoxy tip.
Step 2:
Install mixing nozzle
Step 3:
Insert epoxy tube into barrel.
Step 4:
Insert epoxy, plunger, and barrel into caulking gun.
Step 5:
Snip end of mixing nozzle high enough to allow good flow of epoxy.
Applying Epoxy with a Mixing Nozzle
Step 1:
Snip end of mixing nozzle.
Step 2:
Squirt a small amount of epoxy onto a paper plate to begin the process.
Step 3:
Carefully apply the epoxy at the desired location.
Step 4:
Remove mixing nozzle. Use a rag to wipe excess epoxy from tip of tube.
Step 5:
When the tip is clean, reinstall the protective cap.
Please call if you have any questions
(866) 418-1840 toll free in the US