Design Your Perfect Spa Cover

  • Free Shipping!
  • Over 30 years of experienced craftsmanship
  • Innovative features only available here
spa cover
spa cover

July Special !!
Free
Double Wrapped Cores

Choose a Cover That Fits Your Lifestyle

Basic Premium Optimizer Atlas

4 - 2.5" Tapered Cover

4 - 2.5" Tapered Cover

Our standard taper is 4 to 2.5”. This provides both sufficient strength to be durable under normal conditions, and allows rain to easily run off the cover. Thinner or flat covers are easier to make, cheaper to sell, and more likely to collect water.

1.5 lb Density Cores

1.5 lb Density Cores

The higher the core density, the stronger your cover will be, and the less likely it is to crack or break.

Our Premium Spa Covers feature a core density of 1.5 pounds. This is standard for a new spa purchase and provides sufficient strength in variety of climates.

Cheaper covers use 1 or 1.2 lb densities to keep their advertised cost low and then charge extra for what we include as standard on your new spa cover.

2 Vinyl Handles

2 Vinyl Handles

• With five layers of internal reinforcing, our recessed handles are engineered for strength and good looks.
• The handles are conveniently centered at the front and rear of each cover.

2 Inside Handles

2 Inside Handles

4 Wind-Tough Straps

4 Wind-Tough Straps

• Our triple-reinforced, wind-tough straps are standard, (not an upgrade) on all our covers, helping to keep your cover in place under normal winter conditions.
• New safety clips are also included on your cover for the same standard price.

4 - 2.5" Tapered Cover

4 - 2.5" Tapered Cover

Our standard taper is 4 to 2.5”. This provides both sufficient strength to be durable under normal conditions, and allows rain to easily run off the cover. Thinner or flat covers are easier to make, cheaper to sell, and more likely to collect water.

1.5 lb Density Cores

1.5 lb Density Cores

The higher the core density, the stronger your cover will be, and the less likely it is to crack or break.

Our Premium Spa Covers feature a core density of 1.5 pounds. This is standard for a new spa purchase and provides sufficient strength in variety of climates.

Cheaper covers use 1 or 1.2 lb densities to keep their advertised cost low and then charge extra for what we include as standard on your new spa cover.

2 Vinyl Handles

2 Vinyl Handles

• With five layers of internal reinforcing, our recessed handles are engineered for strength and good looks.
• The handles are conveniently centered at the front and rear of each cover.

2 Inside Handles

2 Inside Handles

• Visible only when you open the cover, these smart inside handles are off-set for easy handling while inside or the outside the spa.

4 Wind-Tough Straps

4 Wind-Tough Straps

• Our triple-reinforced, wind-tough straps are standard, (not an upgrade) on all our covers, helping to keep your cover in place under normal winter conditions.
• New safety clips are also included on your cover for the same standard price.

2 Rubber Handles

2 Rubber Handles

Ergonomically shaped for an easy grip, two handsome rubber handles are included with your new Spa Cover. They are placed at the front of the spa cover on either side.

Full Length Heat Seal

Full Length Heat Seal

The most common places to lose heat are at either end of the cover hinge or along the hinge itself.

Most manufacturers compensate by adding a small pad at either end of the hinge; then charge more for additional, real protection.

Our covers include a full-length heat seal to prevent leak points all along the hinge, not just at the ends. This saves heat, energy and money.

Extra Grommets

Extra Grommets

• Not just one drainage grommet but up to seven per side, based on the size of your cover.
• If you've ever had water trapped on the underside of your cover and it has nowhere to go, you'll understand why these extra grommets are so important.
• And they are standard on all easy spa parts covers

5 - 3" Tapered Cover

5 - 3" Tapered Cover

By upgrading the core thickness in our 5 to 3” tapered cover, we also increase the core’s strength. This means your new spa cover will stand up better to normal wear, as well as light snow conditions.

The R value, which is the insulation effectiveness of the cover, also increases over 35%.

1.5 lb Density Cores

1.5 lb Density Cores

The higher the core density, the stronger your cover will be, and the less likely it is to crack or break.

Our Premium Spa Covers feature a core density of 1.5 pounds. This is standard for a new spa purchase and provides sufficient strength in variety of climates.

Cheaper covers use 1 or 1.2 lb densities to keep their advertised cost low and then charge extra for what we include as standard on your new spa cover.

2 Vinyl Handles

2 Vinyl Handles

• With five layers of internal reinforcing, our recessed handles are engineered for strength and good looks.
• The handles are conveniently centered at the front and rear of each cover.

2 Inside Handles

2 Inside Handles

• Visible only when you open the cover, these smart inside handles are off-set for easy handling while inside or the outside the spa.

4 Wind-Tough Straps

4 Wind-Tough Straps

• Our triple-reinforced, wind-tough straps are standard, (not an upgrade) on all our covers, helping to keep your cover in place under normal winter conditions.
• New safety clips are also included on your cover for the same standard price.

2 Rubber Handles

2 Rubber Handles

Ergonomically shaped for an easy grip, two handsome rubber handles are included with your new Spa Cover. They are placed at the front of the spa cover on either side.

Full Length Heat Seal

Full Length Heat Seal

The most common places to lose heat are at either end of the cover hinge or along the hinge itself.

Most manufacturers compensate by adding a small pad at either end of the hinge; then charge more for additional, real protection.

Our covers include a full-length heat seal to prevent leak points all along the hinge, not just at the ends. This saves heat, energy and money.

Extra Grommets

Extra Grommets

• Not just one drainage grommet but up to seven per side, based on the size of your cover.
• If you've ever had water trapped on the underside of your cover and it has nowhere to go, you'll understand why these extra grommets are so important.
• And they are standard on all easy spa parts covers

5 - 4" Tapered Cover

5 - 4" Tapered Cover

The Atlas Cover takes the thickness of our 5 – 4” tapered cover, combines it with a 2# density core, and reinforces the hinge with a galvanized steel channel. Because this cover can hold up to 1000# of static weight, we recommend it for areas in harsh weather climates.

2.0 lb Density Cores

2.0 lb Density Cores

The higher the core density, the stronger your cover will be, and the less likely it is to crack or break.

• If you get more than several inches of snow at a time, our 2 lb density cores are right for you!
• When combined with 5 – 4” tapered cores, these 2 lb density cores on our Atlas Cover support up to 1000 lb of static weight.

2 Vinyl Handles

2 Vinyl Handles

• With five layers of internal reinforcing, our recessed handles are engineered for strength and good looks.
• The handles are conveniently centered at the front and rear of each cover.

2 Inside Handles

2 Inside Handles

• Visible only when you open the cover, these smart inside handles are off-set for easy handling while inside or the outside the spa.

4 Wind-Tough Straps

4 Wind-Tough Straps

• Our triple-reinforced, wind-tough straps are standard, (not an upgrade) on all our covers, helping to keep your cover in place under normal winter conditions.
• New safety clips are also included on your cover for the same standard price.

2 Rubber Handles

2 Rubber Handles

Ergonomically shaped for an easy grip, two handsome rubber handles are included with your new Spa Cover. They are placed at the front of the spa cover on either side.

Full Length Heat Seal

Full Length Heat Seal

The most common places to lose heat are at either end of the cover hinge or along the hinge itself.

Most manufacturers compensate by adding a small pad at either end of the hinge; then charge more for additional, real protection.

Our covers include a full-length heat seal to prevent leak points all along the hinge, not just at the ends. This saves heat, energy and money.

Extra Grommets

Extra Grommets

• Not just one drainage grommet but up to seven per side, based on the size of your cover.
• If you've ever had water trapped on the underside of your cover and it has nowhere to go, you'll understand why these extra grommets are so important.
• And they are standard on all easy spa parts covers

Double Wrapped Cores

Double Wrapped Cores

When a spa cover is made, the Styrofoam cores are wrapped in a layer of polyethylene plastic sheet for protection, and electronically sealed. The wrapped cores are then slid into the vinyl skin.

Over time, the single wrap protection breaks down and allows the core to absorb water. This happens so slowly you hardly notice it’s getting harder to open your cover.

With double wrapped protection, this process occurs slower, so your cover stays lighter – longer.

Free Shipping

Free Shipping

• That’s right, shipping is included in our price!
• Your new spa cover is packaged to ship directly to your home, so there is no need to borrow a truck and drive someplace to pick it up.
• Old covers can usually be disposed of by requesting a “large item pickup” from your weekly sanitation service.

Free Shipping

Free Shipping

• That’s right, shipping is included in our price!
• Your new spa cover is packaged to ship directly to your home, so there is no need to borrow a truck and drive someplace to pick it up.
• Old covers can usually be disposed of by requesting a “large item pickup” from your weekly sanitation service.

Free Shipping

Free Shipping

• That’s right, shipping is included in our price!
• Your new spa cover is packaged to ship directly to your home, so there is no need to borrow a truck and drive someplace to pick it up.
• Old covers can usually be disposed of by requesting a “large item pickup” from your weekly sanitation service.

Free Shipping

Free Shipping

• That’s right, shipping is included in our price!
• Your new spa cover is packaged to ship directly to your home, so there is no need to borrow a truck and drive someplace to pick it up.
• Old covers can usually be disposed of by requesting a “large item pickup” from your weekly sanitation service.

Strength Rating 310 Strength Rating 310 Strength Rating 380 Strength Rating 1000+
Insulating R value 14.5 Insulating R value 14.5 Insulating R value 20 Insulating R value 30+
       
$349 $379 $404 $499
Need an Upgrade?
Double Wrapped Cores

Double Wrapped Cores

When a spa cover is made, the Styrofoam cores are wrapped in a layer of polyethylene plastic sheet for protection, and electronically sealed. The wrapped cores are then slid into the vinyl skin.

Over time, the single wrap protection breaks down and allows the core to absorb water. This happens so slowly you hardly notice it’s getting harder to open your cover.

With double wrapped protection, this process occurs slower, so your cover stays lighter – longer.

Free!
Hinge Protector

Hinge Protector

• The spa cover hinge is among the first spa cover features to wear out; this is because the hinge is a moving part.
• While every hinge on our spa covers comes reinforced, extreme weather conditions or ill-fitted spa cover lifter designs can shorten the hinge lifespan.
• Easy Spa Parts is the only company to offer a Hinge Protector directly centered over the hinge. This provides additional protection where it's needed most, and will increase the lifespan of your new spa cover!

$25
Double Wrapped Cores

Double Wrapped Cores

When a spa cover is made, the Styrofoam cores are wrapped in a layer of polyethylene plastic sheet for protection, and electronically sealed. The wrapped cores are then slid into the vinyl skin.

Over time, the single wrap protection breaks down and allows the core to absorb water. This happens so slowly you hardly notice it’s getting harder to open your cover.

With double wrapped protection, this process occurs slower, so your cover stays lighter – longer.

Free!
Hinge Protector

Hinge Protector

• The spa cover hinge is among the first spa cover features to wear out; this is because the hinge is a moving part.
• While every hinge on our spa covers comes reinforced, extreme weather conditions or ill-fitted spa cover lifter designs can shorten the hinge lifespan.
• Easy Spa Parts is the only company to offer a Hinge Protector directly centered over the hinge. This provides additional protection where it's needed most, and will increase the lifespan of your new spa cover!

$25
Double Wrapped Cores

Double Wrapped Cores

When a spa cover is made, the Styrofoam cores are wrapped in a layer of polyethylene plastic sheet for protection, and electronically sealed. The wrapped cores are then slid into the vinyl skin.

Over time, the single wrap protection breaks down and allows the core to absorb water. This happens so slowly you hardly notice it’s getting harder to open your cover.

With double wrapped protection, this process occurs slower, so your cover stays lighter – longer.

Free!
Hinge Protector

Hinge Protector

• The spa cover hinge is among the first spa cover features to wear out; this is because the hinge is a moving part.
• While every hinge on our spa covers comes reinforced, extreme weather conditions or ill-fitted spa cover lifter designs can shorten the hinge lifespan.
• Easy Spa Parts is the only company to offer a Hinge Protector directly centered over the hinge. This provides additional protection where it's needed most, and will increase the lifespan of your new spa cover!

$25
2 lb Density Cores

2 lb Density Cores

The higher the core density, the stronger your cover will be, and the less likely it is to crack or break.

• If you get more than several inches of snow at a time, our 2 lb density cores are right for you!
• When combined with 5 – 4” tapered cores, these 2 lb density cores on our Atlas Cover support up to 1000 lb of static weight.

$50
Hinge Protector

Hinge Protector

• The spa cover hinge is among the first spa cover features to wear out; this is because the hinge is a moving part.
• While every hinge on our spa covers comes reinforced, extreme weather conditions or ill-fitted spa cover lifter designs can shorten the hinge lifespan.
• Easy Spa Parts is the only company to offer a Hinge Protector directly centered over the hinge. This provides additional protection where it's needed most, and will increase the lifespan of your new spa cover!

$25

Dimension One Bay Series Spas
Lotus or Dupree
4. 5 – 2.5” Tapered Cover
1.5 lb Density Cores

1.5 lb Density Cores

The higher the core density, the stronger your cover will be, and the less likely it is to crack or break.

Our Premium Spa Covers feature a core density of 1.5 pounds. This is standard for a new spa purchase and provides sufficient strength in variety of climates.

Cheaper covers use 1 or 1.2 lb densities to keep their advertised cost low and then charge extra for what we include as standard on your new spa cover.

$499
Sarena or Amore
5 - 2.5" Tapered Cover
1.5 lb Density Cores

1.5 lb Density Cores

The higher the core density, the stronger your cover will be, and the less likely it is to crack or break.

Our Premium Spa Covers feature a core density of 1.5 pounds. This is standard for a new spa purchase and provides sufficient strength in variety of climates.

Cheaper covers use 1 or 1.2 lb densities to keep their advertised cost low and then charge extra for what we include as standard on your new spa cover.

$599
Need an Upgrade?
Double Wrapped Cores

Double Wrapped Cores

When a spa cover is made, the Styrofoam cores are wrapped in a layer of polyethylene plastic sheet for protection, and electronically sealed. The wrapped cores are then slid into the vinyl skin.

Over time, the single wrap protection breaks down and allows the core to absorb water. This happens so slowly you hardly notice it’s getting harder to open your cover.

With double wrapped protection, this process occurs slower, so your cover stays lighter – longer.

Free!
Hinge Protector

Hinge Protector

• The spa cover hinge is among the first spa cover features to wear out; this is because the hinge is a moving part.
• While every hinge on our spa covers comes reinforced, extreme weather conditions or ill-fitted spa cover lifter designs can shorten the hinge lifespan.
• Easy Spa Parts is the only company to offer a Hinge Protector directly centered over the hinge. This provides additional protection where it's needed most, and will increase the lifespan of your new spa cover!

$25
5 - 3" Tapered Cover

5 - 3" Tapered Cover $25

By upgrading the core thickness in our 5 to 3” tapered cover, we also increase the core’s strength. This means your new spa cover will stand up better to normal wear, as well as light snow conditions.

The R value, which is the insulation effectiveness of the cover, also increases over 35%.

$25
Double Wrapped Cores

Double Wrapped Cores

When a spa cover is made, the Styrofoam cores are wrapped in a layer of polyethylene plastic sheet for protection, and electronically sealed. The wrapped cores are then slid into the vinyl skin.

Over time, the single wrap protection breaks down and allows the core to absorb water. This happens so slowly you hardly notice it’s getting harder to open your cover.

With double wrapped protection, this process occurs slower, so your cover stays lighter – longer.

Free!
Hinge Protector

Hinge Protector

• The spa cover hinge is among the first spa cover features to wear out; this is because the hinge is a moving part.
• While every hinge on our spa covers comes reinforced, extreme weather conditions or ill-fitted spa cover lifter designs can shorten the hinge lifespan.
• Easy Spa Parts is the only company to offer a Hinge Protector directly centered over the hinge. This provides additional protection where it's needed most, and will increase the lifespan of your new spa cover!

$25
Current Subtotal: $

Design Your Perfect Spa Cover

Select Your Color

(Samples Available Upon Request)

Rust


Mayan
(Exclusive Dimension One color)

Wildwood


Adobe
(Exclusive Dimension One color)

Walnut


Gray


Ash

Charcoal

Sky Blue

Teal

Navy

Forest


Select Your Skirt & Strap Length


Skirt Length
 
Strap Length

Long enough to cover the spa shell, keeps heat in and dirt out

 
Triple reinforced straps secure the cover to the spa cabineton all corners


Select Your Model

If your spa cover is listed in red, we have your template already and there is no need to measure.
Spa Manufacturer
Year
Model Help me find this
Year & Model Help me find this
Serial Number (If Available) Help me find this

Add an Optional Cover Lift


EZ Lifter
$155



Cover Mate lll
$294


Cover Shelf
$139


Current Subtotal: $

We stock a variety of Dimension One Spa Parts including Dimension One Spa Covers, Filters, Vision Cartridges, Water Care, D1 Jets, D1 Pillows, EZ lifter and Covers, Upper controls, Electronics, Pumps, Ozone systems as well as other Dimension Hot Tub products and parts.


Easy Spa Parts specializes in hot tub parts, spa parts and accessories for owners of Dimension One Spas (D1 Spas). We stock a variety of Dimension One Spa Parts including Dimension One Spa Covers, Filters, Vision Cartridges, Water Care, D1 Jets, D1 Pillows, EZ lifter and Covers, Upper controls, Electronics, Pumps, Ozone systems as well as other Dimension Hot Tub products and parts.

Proudly Serving cities like San Diego, Seattle, Salt Lake City, Vancouver, Louisville, Omaha, Helena, Wilmington, San Francisco and other fine cities across the USA