REPLACING THE CLEARZONE CD CHIP

Replacing the ClearZone CD Chip is quick, easy, and only requires a Phillips head screwdriver. For best results, replace this chip every 12 months.

1. Turn off all power at the GFCI

2. Remove the access door panel

 

3. The ClearZone Generator Assembly looks like this and is mounted with 2 screws to a wall in the equipment area. Remove the complete assembly from the wall. You should not need to unplug the cord to perform this work.

 

4. Remove the 3 screws from the back of the unit.

 

5. Separate the back plate from the main box. Look carefully at the way the wires lay in the box. You’ll want to come as close as possible to duplicating this when completing the re-assembly.

 

6. Lift the CD chip out of the main box.

 

7. Unplug all 3 connectors leading to the CD Chip. Each connector has a different shape so it’s impossible to re-assemble incorrectly. Then reconnect the 3 new plugs.

 

8. Re-seat the CD Chip and wires in the main box. The lid should fi t easily onto the box without forcing anything. Look at Step 5 if you need some clues.

 

9. Re-attach the lid with the 3 screws from step 4.

 

10. Re-install the ClearZone Ozone Generator Assembly to its original place on the equipment frame.

11. Turn power back on at the GFCI. A light should be visible through the window on the front of the generator assembly. This tells you the replacement is successful and everything is working properly.

12. Replace the access door panel

 

 

 

These instructions are for informational purposes only. Easy Spa Parts does not guarantee that following these instructions will resolve your specific spa condition, nor does Easy Spa Parts accept liability for work performed by anyone attempting the repair or part replacement. These instructions are provided solely by Easy Spa Parts. Certain parts mentioned in the instructions are manufactured by third parties, including Dimension One Spas. Dimension One Spas has not supplied or reviewed these instructions. Dimension One Spas shall have no liability to you relating in any manner to these instructions or any acts or omissions by Easy Spa Parts.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW: 1) EASY SPA PARTS AND DIMENSION ONE SPAS EXCLUDE ALL IMPLIED WARRANTIES THAT MAY ARISE IN CONNECTION WITH THE INSTRUCTIONS, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE; 2) NEITHER EASY SPA PARTS NOR DIMENSION ONE SPAS SHALL BE LIABLE UNDER ANY LEGAL OR EQUITABLE THEORY, WHETHER IN CONTRACT, TORT OR OTHERWISE (INCLUDING NEGLIGENCE AND STRICT LIABILITY) FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES WHATSOEVER , ARISING FROM YOUR USE OF THE INSTRUCTIONS OR FROM ANY MATERIAL CONTAINED IN, OR OMITTED FROM, THE INSTRUCTIONS.